Problem with load for 1.62.3 on El Capitan

Qbox installation issues
Forum rules
You must be a registered user to post in this forum. Registered users may also post new topics if they consider that their subject do not correspond to any topic already present on the forum.
Post Reply
jimmyxia
Posts: 1
Joined: Sun Oct 04, 2015 3:55 pm

Problem with load for 1.62.3 on El Capitan

Post by jimmyxia »

Using the precompiled version for Yosemite on El Capitan, I got the following error when trying to use the functions 'species' and 'load':

Code: Select all

[qbox] species silicon silicon.xml
  SpeciesCmd: defining species silicon as silicon.xml
[Liyus-MacBook-Air:07106] *** Process received signal ***
[Liyus-MacBook-Air:07106] Signal: Abort trap: 6 (6)
[Liyus-MacBook-Air:07106] Signal code:  (0)
[Liyus-MacBook-Air:07106] *** End of error message ***
Abort trap: 6
silicon.xml is just http://fpmd.ucdavis.edu/potentials/Si/S ... DA-1.0.xml downloaded to my local directory. But ‘species silicon http://fpmd.ucdavis.edu/potentials/Si/S ... DA-1.0.xml’ works fine.

Code: Select all

[qbox] load test.xml
 LoadCmd: loading from test.xml
 XMLGFPreprocessor: reading from test.xml size: 2955619
 XMLGFPreprocessor: read time: 0.009517
 XMLGFPreprocessor: local read rate: 296.2 MB/s  aggregate read rate: 296.2 MB/s
 XMLGFPreprocessor: tag fixing time: 1.907e-06
 XMLGFPreprocessor: segment definition time: 0.007207
 XMLGFPreprocessor: boundary adjustment time: 1.001e-05
 XMLGFPreprocessor: transcoding time: 0.009664
 XMLGFPreprocessor: data redistribution time: 0.003804
 XMLGFPreprocessor: XML compacting time: 0.0001309
 XMLGFPreprocessor: total time: 0.03066
 xmlcontent.size(): 120539
 Starting XML parsing
[Liyus-MacBook-Air:07104] *** Process received signal ***
[Liyus-MacBook-Air:07104] Signal: Abort trap: 6 (6)
[Liyus-MacBook-Air:07104] Signal code:  (0)
[Liyus-MacBook-Air:07104] *** End of error message ***
Abort trap: 6 
Here test.xml is generated by the following script:

Code: Select all

set cell 24 0 0 0 24 0 0 0 24
species silicon http://fpmd.ucdavis.edu/potentials/Si/Si_VBC_LDA-1.0.xml
atom Si1 silicon  3.700  0.000  0.000
atom Si2 silicon  0.000  2.200  0.000
atom Si3 silicon -3.700  0.000  0.000
atom Si4 silicon  0.000 -2.200  0.000
set ecut 15
set wf_dyn PSDA
set ecutprec 2
randomize_wf
run 0 200
save test.xml
The list of dynamic libraries used on El Capitan is the following:

Code: Select all

qbox-1.62.3-OSX-Yosemite:
	/usr/lib/libcurl.4.dylib (compatibility version 7.0.0, current version 8.0.0)
	/usr/lib/libiconv.2.dylib (compatibility version 7.0.0, current version 7.0.0)
	/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 1213.0.0)
It seems like xerces is not there, so I compile my own qb using the following makefile header:

Code: Select all

#
# Copyright (c) 2014 The Regents of the University of California
#
# This file is part of Qbox
#
# Qbox is distributed under the terms of the GNU General Public License
# as published by the Free Software Foundation, either version 2 of
# the License, or (at your option) any later version.
# See the file COPYING in the root directory of this distribution
# or <http://www.gnu.org/licenses/>.
#
#-------------------------------------------------------------------------------
#
#  macosx_openmpi.mk
#
#-------------------------------------------------------------------------------
#
 PLT=MacOSX_x86_64
#-------------------------------------------------------------------------------
 SCALAPACKDIR=/Users/jimmyxia/Desktop/MENG/scalapack-2.0.2
 LAPACKDIR=/Users/jimmyxia/Desktop/MENG/lapack-3.5.0
 BLASDIR=/Users/jimmyxia/Desktop/MENG/BLAS
 GFORTRAN=/usr/local/gfortran
 PLTFLAGS += -DUSE_FFTW3
 PLTFLAGS += -DFFTWMEASURE
 PLTFLAGS += -DFFTW3_2D
 FFTWDIR=/Users/jimmyxia/Desktop/MENG/fftw-3.3.4
 FFTWINCLUDEDIR=$(FFTWDIR)/api
 FFTWLIBDIR=$(FFTWDIR)/.libs
 INCLUDE += -I$(FFTWINCLUDEDIR)
 LIBPATH += -L$(FFTWLIBDIR)
 LIBS += -lfftw3


 PLTOBJECTS = readTSC.o

 CXX=mpiCC
 LD=$(CXX)

 PLTFLAGS += -DIA32 -DUSE_MPI -D_LARGEFILE_SOURCE \
             -D_FILE_OFFSET_BITS=64 -DADD_ \
             -DAPP_NO_THREADS -DXML_USE_NO_THREADS -DUSE_XERCES -DXERCESC_3 \
             -DSCALAPACK

 INCLUDE += -I$(LAPACKDIR) -I$(SCALAPACKDIR) -I$(GFORTRAN)/include

 CXXFLAGS= -g -O3 -D$(PLT) $(INCLUDE) $(PLTFLAGS) $(DFLAGS)

 LIBPATH += -L$(SCALAPACKDIR) -L$(LAPACKDIR) -L$(BLASDIR) -L$(GFORTRAN)/lib

 LIBS +=  -lscalapack -llapack -lblas -lm -lgfortran \
         -lxerces-c -lpthread -lmpi_cxx -lstdc++ -lcurl -liconv

 LDFLAGS = $(LIBPATH) $(LIBS)
#-------------------------------------------------------------------------------
Now xerces is in the dynamic libraries used:

Code: Select all

qb:
	/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 1225.1.1)
	/usr/local/lib/libxerces-c-3.1.dylib (compatibility version 0.0.0, current version 0.0.0)
	/usr/local/lib/libuuid.16.dylib (compatibility version 17.0.0, current version 17.22.0)
	/usr/local/gfortran/lib/libgfortran.3.dylib (compatibility version 4.0.0, current version 4.0.0)
	/usr/local/lib/libmpi_cxx.1.dylib (compatibility version 3.0.0, current version 3.3.0)
	/usr/local/lib/libmpi.1.dylib (compatibility version 8.0.0, current version 8.0.0)
	/usr/lib/libc++.1.dylib (compatibility version 1.0.0, current version 120.1.0)
Also ‘species silicon silicon.xml’ works now. However, the first time I do ‘load test.xml’, it works; but if I load it again, I get the following error:

Code: Select all

[qbox] load test.xml
 LoadCmd: loading from test.xml
[wireless-s1-no-150-27-8:13429] *** Process received signal ***
[wireless-s1-no-150-27-8:13429] Signal: Segmentation fault: 11 (11)
[wireless-s1-no-150-27-8:13429] Signal code: Address not mapped (1)
[wireless-s1-no-150-27-8:13429] Failing at address: 0x1
[wireless-s1-no-150-27-8:13429] [ 0] 0   libsystem_platform.dylib            0x00007fff9699852a _sigtramp + 26
[wireless-s1-no-150-27-8:13429] [ 1] 0   ???                                 0x0000000000000000 0x0 + 0
[wireless-s1-no-150-27-8:13429] [ 2] 0   qb                                  0x000000010d9d6c1a _ZN7LoadCmd6actionEiPPc + 378
[wireless-s1-no-150-27-8:13429] [ 3] 0   qb                                  0x000000010d9d4301 _ZN13UserInterface11processCmdsERNSt3__113basic_istreamIcNS0_11char_traitsIcEEEEPKcb + 1137
[wireless-s1-no-150-27-8:13429] [ 4] 0   qb                                  0x000000010d96dc20 main + 12304
[wireless-s1-no-150-27-8:13429] [ 5] 0   libdyld.dylib                       0x00007fff974a15ad start + 1
[wireless-s1-no-150-27-8:13429] [ 6] 0   ???                                 0x0000000000000001 0x0 + 1
[wireless-s1-no-150-27-8:13429] *** End of error message ***
Segmentation fault: 11
This happens in both interactive and batch mode, both single node and 2-nodes. I have not encountered any instance that I need to load twice in one script. But does anyone know how to fix this?
Post Reply